|
|
|
E-Z-GO
MPT
800E |
|
Click here to see specs for
the
E-Z-GO MPT 800G |
 |
STANDARD EQUIPMENT:
Motor: Heavy Duty 36 volt DC high efficiency series wound, brazed
armature, solid copper windings. Non vented 2.5 HP @ 2700 RPM (one hour).
Drive Train: Direct motor shaft connected to transaxle pinion shaft.
Transaxle: High efficiency differential with helical gears, 12.44
ratio.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting with
non-asbestos linings. Automatic park brake release with self-compensating
system.
Electrical System: 36 volt DC, six, 6 volt heavy duty, deep cycle
storage batteries (107 minute, 220 amp-hour @ 20 Hr. discharge rate). State
of charge meter.
Speed Control: Solid State Controller, 300 amp rated.
Charger: : Powerwise™ portable fully automatic line compensating, 21
amp DC output at 36 volts; input 120 volts, 9.5 amps, 60 cycle AC,
Underwriters Laboratories (U.L.) Listed, C.S.A. Certified, anti drive away
charger/vehicle interlock.
Front Suspension: Heavy duty leaf springs with hydraulic
shock absorbers.
Rear Suspension: Heavy duty leaf springs with hydraulic
shock absorbers.
Steering: Self-compensating single reduction rack and pinion.
Seating: Vacuum formed fabric backed vinyl covers over thick cushion
foam. Standard seating for operator and one passenger.
Speed: 12.5 – 13.5 MPH (20 - 22 KPH) |
|
DIMENSIONAL
SPECIFICATIONS:
Weight: 675 lbs. (306kg), without batteries
Length: 103 inches(2.6m)
Width: 46.5 inches (1.18m)
Height: 46.5 inches (1.18m) (top of steering wheel)
Ground Clearance: 4.75 inches (0.12m) (at differential)
Wheel Base: 65.5 inches (1.66m)
Front Wheel Tread: 37.5 inches
(0.95m)
Rear Wheel Tread: 38.0 inches (0.97m)
Turning Clearance Diameter: 19 feet (5.79m)
Tires: 18 X 8.5 X 8 (4 ply rated)
Load Capacity: 800 lbs. (362kg) including operator, passenger,
accessories and cargo. 500 lb. max. bed load.
Load Bed Size: 46 inches wide, 35 inches long, 10 inches deep (117cm
x 89cm x 25cm)
Load Bed Volume: 9 cubic feet (0.25 cubic meters) |
|
FEATURES:
Body: Front: Flexible impact resistant front cowl. Rear: Lightweight,
replaceable, steel panels.
Finish: Durashield™ powder primer and top coat.
Body Protection: Flexible front fender flair.
Cargo Bed: Heavy duty bed liner with tailgate cover. Quick release
for easy service access. Hinged, removable tailgate, removable bed sides.
Chassis: Welded high yield strength tubular steel with Durashield™
powder coat paint and E-shield.
Safety: Dash mounted key switch, reverse warning indicator, "deadman"
accelerator control, integral handgrip on hip restraints, manual
forward/reverse selector, Horn.
Dash Panel: Instrument Panel with four drink holders.
Steering Wheel: Sport Model. |
|
O P T I O N S / A C C E S S O
R I E S: |
 |
 |
 |
 |
 |
|
|
back to top |
|
E-Z-GO
MPT 800G |
|
Click here to see specs for
the
E-Z-GO
MPT 800E |
|
STANDARD EQUIPMENT:
Engine: 9.0 H.P. (6.7KW) Rated, 4 cycle, 18 ci (295 cc) twin cylinder,
air cooled, by Robin USA.
Valve Train: Overhead Valve, overhead cam, belt drive.
Lubrication: Pressurized oil system, washable permanent filter.
Balancer: Internal counter rotating balance shaft.
Ignition: Solid State with crank trigger, electronic timing advance,
and RPM limiter.
Carburetor: Fixed jet float bowl with remote pulse fuel pump.
Air Cleaner: Engine mounted integral air intake system with
multi-phase silencer and washable cartridge filter element; patent pending.
Electrical System: Starter/Generator, solid state regulator, 12 volt
maintenance free battery, 430 CCA, 60 minute reserve.
Drive Train: Automatic, continuously variable transmission (CVT)
Transaxle: High efficiency helicle gears,13.32:1 ratio, ground speed
governor, forward/reverse.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting with
non-asbestos linings. Automatic park brake release with self-compensating
system.
Front Suspension: Heavy duty leaf springs with hydraulic shock absorbers.
Rear Suspension: Heavy duty leaf springs with hydraulic shock absorbers.
Steering: Self-compensating single reduction rack and pinion.
Fuel System: 6.0 gallon (22.8l) tank.
Speed: 12.5 – 13.5 MPH (20 – 22 KPH) |
|
DIMENSIONAL
SPECIFICATIONS:
Weight: 780 lbs. (354kg), dry; fuel capacity 31 lbs. (14kg)
Length: 103 inches(2.6m)
Width: 46.5 inches (1.18m)
Height: 46.5 inches (1.18m) (top of steering wheel)
Ground Clearance: 4.75 inches (0.12m) (at differential)
Wheel Base: 65.5 inches (1.66m)
Front Wheel Tread: 37.5 inches(0.95m)
Rear Wheel Tread: 38.0 inches(0.97m)
Turning Clearance Diameter: 19 feet (5.79m)
Tires: 18 x 8.50 x 8 (4 ply rated)
Load Capacity: 800 lbs. (362kg) including operator, passenger,
accessories and cargo, 500 lbs. max. bed load.
Load Bed Size: 46 inches wide, 35 inches long, 10 inches deep (117cm
x 89cm x 25cm)
Load Bed Volume: 9 cubic feet (0.25 cubic meters) |
|
FEATURES:
Body: Front: Flexible impact resistant front cowl. Rear: Lightweight,
replaceable, steel panels.
Finish: Durashield™ powder primer and top coat.
Cargo bed: Heavy duty bed liner with tailgate cover. Quick release for
easy service access. Hinged, removable tailgate, removable bed sides.
Chassis: Welded high yield strength tubular steel with Durashield™ powder
coat paint and E-shield.
Safety: Dash mounted key switch, reverse warning indicator, "deadman"
accelerator control, integral handgrip on hip restraints, manual
forward/reverse selector with neutral lock, and Horn.
Dash Panel: Instrument Panel with four drink holders.
Steering Wheel: Sport Model. |
|
O P T I O N S / A C C E S S O
R I E S:
|
|
|
|
|
|
|
|
|
|
back to top |
|
E-Z-GO
MPT
1000E
4 WHEEL ELECTRIC |
 |
STANDARD EQUIPMENT:
Motor: 36 volt DC high efficiency series wound, brazed armature, solid
copper windings. Non vented 2.5 HP @ 2700 RPM (one hour).
Drive Train: Direct motor shaft connected to transaxle pinion shaft.
Transaxle: High efficiency differential with helical gears, 12.44:1
ratio, "Synergy" synthetic lubricant.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting with
non-asbestos linings. Automatic park brake release with self-compensating
system.
Electrical System: 36 volt DC, six, 6 volt deep cycle heavy duty storage
batteries (107 minute, 220 amp-hour @ 20 Hr. discharge rate).
Accelerator Switch: Solid State HDI Controller, 400 amp rated.
Charger: Powerwise™ portable fully automatic line compensating, 21 amp
DC output at 36 volts; input 120 volts, 9.5 amps, 60 cycle AC, Underwriters
Laboratories (U.L.) Listed, C.S.A. Certified, anti drive away
charger/vehicle interlock.
Front Suspension: Heavy duty multiple leaf springs with hydraulic shock
absorbers.
Rear Suspension: Heavy duty multiple leaf springs with hydraulic shock
absorbers.
Steering: Self compensating single reduction rack & pinion.
Seating: Vacuum formed fabric back vinyl covers over thick cushion foam.
Standard seating for operator and one passenger.
Speed: 12 - 14 MPH |
|
DIMENSIONAL
SPECIFICATIONS:
Weight: 824 lbs., without batteries
Length: 110.5”
Width: 48 inches (at bed)
Height: 45.5 inches (at steering wheel)
Floor Height: 10 inches
Load Bed Height: 25 inches
Ground Clearance: 4.3 inches (at differential)
Seat Height: 26 inches
Wheel Base: 77 inches
Front Wheel Tread: 33.5 inches
Rear Wheel Tread: 38 inches
Turning Clearance Diameter: 21.0 feet
Tires: 18 x 8.50 x 8 (4 ply rated)
Load Capacity: 1,000 lbs. (including operator, passenger, accessories
and cargo) 600 lb. max. bed load.
Load Bed Size: 48 inches wide, 40 inches long, 12 inches deep
Load Bed Capacity: 13.3 cubic feet (.49 cubic yard) |
|
FEATURES:
1. Load Bed: Tilts for complete access to drive package. Removable sides
and tailgate.
2. Chassis: Welded high yield strength tubular steel.
3. Body: Front : Durashield ™ of automotive quality injection molded
TPE (thermoplastic elastomer). Molded in color with automotive color coat /
clear coat finish.
Rear: steel, replaceable lightweight panels.
4. Finish: Durashield ™ powder primer and topcoat.
5. Body Protection: Flexible rear fenders and flexible front cowl .
Bed and tailgate liner.
6. Safety: Removable key switch, reverse warning indicator, "deadman"
accelerator control, vinyl handgrip and hip restraints, manual F & R switch,
and electric horn.
7. Center Console: Instrument panel with four drink holders.
8. Steering Wheel: Molded high impact plastic with dual handgrips,
pencil holder, and a convenient clipboard. |
|
OPTIONS:
 |
Wrap Around Front Bumper |
|
|
Non-Standard Paint Color |
|
|
Headlights & Taillights |
|
|
Brake Lights |
|
|
Light Bar (With Beacon and/or Flood Lights) |
|
|
Turn Signals With 4-Way Flashers |
|
|
Utility Box |
|
|
Hour Meter |
|
|
State of Charge Meter (LED) |
|
|
135 Min., 240 Amp-Hr. Batteries |
|
|
145 Min., 250 Amp-Hr. Batteries |
|
|
Differential Scuff Guard |
|
|
Trailer Hitch |
|
|
Tailgate Loading Ramp |
|
|
Cooler Insert |
|
|
Sun Canopy Top |
|
|
Tires: 18.5 x 8.50, 6 ply rated |
|
|
5.70 x 8, 6 ply rated industrial |
|
|
Windshield - Flat - Clear |
|
|
Windshield - Flat - Tinted |
|
|
Windshield - Split - Clear |
|
|
Windshield - Split - Tinted |
|
|
Electric Dump |
|
|
Flat Bed 40” |
|
|
Wood Stake Sides (40”) |
|
|
Enclosure - Soft Sided |
|
|
Hub Caps:
|
|
8" Chrome or 6" Moon Type.
|
|
|
Spoke: Silver & Black or Gold & Black |
|
|
|
|
back to top |
|
E-Z-GO
MPT
1200G
4 WHEEL GASOLINE |
 |
STANDARD EQUIPMENT: (4
Cycle)
Engine: 11.0 H.P. rated, 4 cycle, 350 cc twin cylinder, air cooled
Valve train: Overhead valve, overhead cam.
Lubrication: Pressurized oil system, washable permanent filter.
Balancer: Internal counter rotating balance shaft.
Ignition: Solid state with crank trigger, electronic timing advance,
and RPM limiter.
Carburetor: Fixed jet float bowl with remote pulse fuel pump.
Air Cleaner: Replaceable dry cartridge with remote air intake.
Electrical System: External starter/generator, 12 volt maintenance
free battery, 360 CCA, 51 minute reserve.
Drive Train: Automatic, continuously variable transmission (CVT)
forward and reverse.
Transaxle: High efficiency differential with helical gears, 13.32:1
ratio, ground speed governor.
Brakes: Dual rear wheel mechanical drum brakes, self-adjusting with
non-asbestos linings. Automatic park brake release with self-compensating
system.
Front Suspension: Leaf springs with hydraulic shock absorbers.
Rear Suspension: Leaf springs with hydraulic shock absorbers.
Steering: Self-compensating single reduction rack and pinion.
Seating: Vacuum formed fabric backed vinyl covers over thick cushion
foam. Standard seating for operator and one passenger.
Fuel System: 6.0 gallon tank with mechanical fuel gauge gas cap.
Speed: Automatically governed to 15 MPH on level ground. |
|
DIMENSIONAL
SPECIFICATIONS:
Weight: 910 lbs. dry (fuel capacity 31 lbs.)
Length: 110.5 inches
Width: 48 inches (at bed)
Height: 45.5 inches (at steering wheel)
Floor Height: 10 inches
Load Bed Height: 25 inches
Ground Clearance: 4.3 inches (at differential)
Seat Height: 26 inches
Wheel Base: 77 inches
Front Wheel Tread: 33.5 inches
Rear Wheel Tread: 38 inches
Turning Clearance Diameter: 21 feet
Tires: 18 x 8.50 x 8 (4 ply rated)
Load Capacity: 1,200 lbs. (including operator, passengers,
accessories and cargo) 800 max. load bed.
Load Bed Size: 48 inches wide, 40 inches long, 12 inches deep
Load Bed Capacity: 13.3 cubic feet (.49 cubic yard)
Intersecting Aisle Clearance: 83 inches
Turning Radius: 10.3 feet |
|
FEATURES:
1. Load Bed: Tilts for complete access to drive package. Removable sides
and tailgate.
2. Chassis: Welded high yield strength tubular steel.
3. Body: Front : Durashield ™ of automotive quality injection molded
TPE (thermoplastic elastomer). Rear: steel, replaceable lightweight panels.
4. Finish: Durashield ™ powder primer and topcoat.
5. Body Protection: Flexible rear fenders and flexible front cowl .
Bed and tailgate liner. Wrap around front bumper.
6. Safety: Removable key switch, reverse warning indicator, "deadman"
accelerator control, vinyl handgrip and hip restraints, manual F & R switch,
and electric horn.
7. Center Console: Instrument panel with four drink holders.
8. Steering Wheel: Molded high impact plastic with dual handgrips,
pencil holder, and a convenient clipboard. |
|
OPTIONS:
|
|
Hour Meter
|
|
|
Low Fuel Indicator Light
|
|
|
Low Oil Pressure Indicator Light
|
|
|
Non-Standard Paint
|
|
|
Light Bar : Beacon and/or Flood
Lights |
|
|
Spark Arrester Muffler Kit
|
|
|
Sun Canopy Kit
|
|
|
Ball Picker Cage
|
|
|
Rear View Mirror (Sun Canopy
Required) |
|
|
Tires: |
|
|
18 x 8.50 x 8 , 6 ply rated
|
|
|
Headlights, Taillights, and
Brake Lights |
|
|
Turn Signals With 4 Way Flasher
|
|
|
Windshield Kit (Sun Canopy
Required) |
|
|
Cab w/Doors
|
|
|
External Mirrors (Set) (Cab
Required) |
|
|
Beverage Cooler Insert
|
|
|
Power Bed Dump Kit (Electric)
|
|
|
Wood Stake Bed Sides
|
|
|
Flat Bed
|
|
|
48" Truckbed w/tailgate (48"
wide X 48" long X 12" sides) |
|
|
48" Bed/tailgate liner
|
|
|
Trailer hitches
|
|
|
Clevis Type
|
|
|
Ball Type
|
|
|
Van Box ( 40 inch bed)
independent of cab |
|
|
Tailgate Ramp
|
|
|
Weather Protection Package
|
|
|
Heavy Duty Battery
|
|
|
High Performance Axle
|
|
|
Hub Caps
|
|
8" Chrome or 6"
Moon Type |
|
|
Spoke: Silver &
Black or Gold & Black |
|
|
|
|
back to top |
|
|
